This layout is similar to layout 4 but gives you that little bit extra by offering storage space for your shoes too!
In a 3.05m/10' width you would get a 122cm/48" wide section of two tier hanging for your short hanging garments, a 61cm/24" wide section of shelving with a drawer system below for your folded garments, and a 122cm/48" wide section of long hanging space with two shoe racks below to the right hand side.
The layout uses our 30.5cm/12" deep SuperSlide shelving system. The drawer system comprises of a triple depth (28cm/11" deep) drawer, two double depth (18cm/7" deep) drawers, a plastic moulded top, drawer stops and floor protector caps. The system stands at 76cm/30" high, 48cm/19" wide and 59cm/23" deep.
When ordering this layout we recommend that you ensure you have a ceiling height of at least 216cm/85" so that your garments have a long enough drop. We also recommend that you have a minimum closet depth of 59cm/23" to allow enough room for the drawer system.
Our systems must attach to the back wall but will attach to side walls if they are available. Our drawings are shown with both side walls but some people will not have these walls to fix to, and therefore we need to know which wall(s) are available so that we can send the correct components so that you can install your closet properly. Please select the correct option from the drop down menu below, which best describes the availability of your side walls as though facing your closet enclosure working left to right.
Our systems CAN be fixed to stud walls and solid walls with no problems, as long as they are built to standard building regulations.
If your space is not quite 3.05m/10' wide then don't worry as our systems are adjustable. By using a pair of boltcutters (available at £12.99) or a hacksaw, you can cut the steel wire shelving to fit your exact measurements.
